A Portable Unexec Replacement

Owner: ???

Effort: ???

Dependencies: ???

Abstract: Currently, during the build stage of XEmacs, a bare version of the program (called temacs) is run, which loads up a bunch of Lisp data and then writes out a modified executable file. This process is very tricky to implement and highly system-dependent. It can be replaced by a simple, mostly portable, and easy to implement scheme where the Lisp data is written out to a separate data file.

The scheme makes only three assumptions about the memory layout of a running XEmacs process, which, as far as I know, are met by all current implementations of XEmacs (and they're also requirements of the existing unexec scheme):

The initialized data segments of the various XEmacs modules are all laid out contiguously in memory and are separated from the initialized data segments of libraries that are linked with XEmacs; likewise for uninitialized data segments.
The beginning and end of the XEmacs portion of the combined initialized data segment can be programmatically determined; likewise for the uninitialized data segment.
The XEmacs portion of the initialized and uninitialized data segments are always loaded at the same place in memory.

Assumption number three means that this scheme is non-relocatable, which is a disadvantage as compared to other, relocatable schemes that have been proposed. However, the advantage of this scheme over them is that it is much easier to implement and requires minimal changes to the XEmacs code base.

First, let's go over the theory behind the dumping mechanism. The principles that we would like to follow are:

We write out to disk all of the data structures and all of their sub-structures that we have created ourselves, except for data that is expected to change from invocation to invocation (in particular, data that is extracted from the external environment at run time).
We don't write out to disk any data structures created or initialized by system libraries, by the kernel or by any other code that we didn't create ourselves, because we can't count on that code working in the way that we want it to.
At the beginning of the next invocation of our program, we read in all those data structures that we have written out to disk, and then continue as if we had just created and initialized all of that data ourselves.
We make sure that our own data structures don't have any pointers to system data, or if they do, that we note all of these pointers so that we can re-create the system data and set up pointers to the data again in the next invocation.
During the next invocation of our program, we re-create all of our own data structures that are derived from the external environment.

XEmacs, of course, is already set up to adhere to most of these principles.

In fact, the current dumping process that we are replacing does a few of these principles slightly differently and adds a few extra of its own:

All data structures of all sorts, including system data, are written out. This is the cause of no end of problems, and it is avoidable, because we can ensure that our own data and the system data are physically separated in memory.
Our own data structures that we derive from the external environment are in fact written out and read in, but then are simply overwritten during the next invocation with new data. Before dumping, we make sure to free any such data structure that would cause memory leaks.
XEmacs carefully arranges things so that all static variables in the initialized data are never written to after the dumping stage has completed. This allows for an additional optimization in which we can make static initialized data segments in pre-dumped invocations of XEmacs be read-only and shared among all XEmacs processes on a single machine.

The difficult part in this process is figuring out where our data structures lie in memory so that we can correctly write them out and read them back in. The trick that we use to make this problem solvable is to ensure that the heap that is used for all dynamically allocated data structures that are created during the dumping process is located inside the memory of a large, statically declared array. This ensures that all of our own data structures are contained (at least at the time that we dump out our data) inside the static initialized and uninitialized data segments, which are physically separated in memory from any data treated by system libraries and whose starting and ending points are known and unchanging (we know that all of these things are true because we require them to be so, as preconditions of being able to make use of this method of dumping).

In order to implement this method of heap allocation, we change the memory allocation function that we use for our own data. (It's extremely important that this function not be used to allocate system data. This means that we must not redefine the malloc function using the linker, but instead we need to achieve this using the C preprocessor, or by simply using a different name, such as xmalloc. It's also very important that we use the correct free function when freeing dynamically-allocated data, depending on whether this data was allocated by us or by the system. If we don't keep this straight, we are likely to corrupt memory and cause XEmacs to crash.) What our own memory allocation function does is, depending on the circumstances, either call our own memory allocation subfunction (probably based on the routines in gmalloc.c), which allocates memory out of a virtual heap that we have set up using a large statically-declared array, or simply calls the standard malloc function to do the memory allocation. Similarly, the free function that we use either calls our own free subfunction or calls the standard one. (In this case, it's clear which of the two subfunctions we use. We just look at the pointer that was given to us, and see if it's within our large static array or not). The rules governing which of the two allocation subfunctions is used are as follows:

We always use our own allocation subfunction until the first time that it fails.
If this failure occurs during the dumping stage, we abort with an error that we need to increase the size of our static heap. (The static heap needs to be large enough to hold all of the data that we allocate during the dumping phase, but not much larger, so that we don't waste memory or disk space. A static heap is currently used in the Cygwin version of XEmacs, and we can probably adapt many of the routines that are used for this.)
Otherwise, after the first failure of our own allocation subfunction, we switch to using the standard malloc function from then on. (Alternatively, we could always call our own allocation subfunction and then call the standard one whenever our own one fails. This would use memory more efficiently, but would be slower. Another alternative that avoids this trade-off but constricts the choice of allocation methods that we can use is to scrap this two-mode allocation scheme entirely and simply provide an allocation function that can cope with having its heap be in two non-contiguous areas of memory. I think that the routines in gmalloc.c can deal with this, for example).

When it's time to dump out our data, we don't have to do anything complicated involving creating a new executable file like we do currently. All we have to do is write out the data contained in our uninitialized and initialized data segments to a data file. At the beginning of main, the first thing we do is check to see whether we are running as temacs or as xemacs. If we are running as xemacs, then the first thing we do is locate our data file, which should probably be named xemacs.dat, and be located in the same directory as the xemacs executable. Then we load in the data from this data file, overwriting our initialized and uninitialized data segments, and continue with XEmacs as normal. (There is no danger in overwriting things like this because this is the first or almost the very first thing that we do, and we're not going to be overwriting any system data that might have been created or initialized before main was called. We have to be careful, however, with the small number of variables that we initialized in the process of determining whether we should load our data file and then loading this data file.)

I think that the way we determine whether we are running as temacs or xemacs is:

If our executable name begins with temacs, we are running as temacs.
If our data file doesn't exist, we are running as temacs.
If the first command line option is something like -no-data-file, we are running as temacs.

In all of the other circumstances, we load the data file normally and proceed as if this were a normal xemacs invocation.

We can do a further optimization because of the clever way that XEmacs arranges to never write to any variables that exist in the initialized static data segment after the dump phase. When we read in the initialized data segment, instead of reading it in normally using the read system call, we use mmap if it is available. In the call to mmap, we specify the start of the initialized data segment as the first argument, and then we specify the flags MAP_FIXED and MAP_SHARED. This way, the initialized data segment will be read-only and shared among all XEmacs processes on the same machine. (When reading in the uninitialized data segment, we should probably do a similar thing involving mmap, but use the MAP_PRIVATE flag instead of MAP_SHARED so that this data segment essentially becomes copy-on-write.) Memory mapping like this can also be done on Windows; the function is different from mmap, but as far as I know the semantics are equivalent.

Ben Wing

Conform with <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
Automatically validated by PSGML